DIY: Initial Studs

IMG_0778

I wanted to do this post a few months ago but I ended up losing the initial charms that I bought… still haven’t found them so I went and purchased new ones so I can finally check this project off of my list.

What You Need:

IMG_0740

  • Initial charms
  • Gold leaf paint or Gold spray paint (not pictured)
  • Head Pins
  • Earring backs
  • Industrial glue or jewelry glue
  • Wire Cutters (not pictured)
1. First thing you want to do is use the wire cutters to cut the little circle from the charm since you're not going to be connecting it to anything.

1. First thing you want to do is use the wire cutters to cut the little circle from the charm since you’re not going to be connecting it to anything.

IMG_0757

2. Paint your charms and allow them to dry.

3. Use the cutters to snip your head pins wherever you'd like them to end.

3. Use the cutters to snip your head pins wherever you’d like them to end.

IMG_0763

4. Glue one head pin to the center on the backside of each charm charm and allow them to dry.

4. Glue one head pin to the center on the backside of each charm and allow them to dry.

That’s it! When you wear them just remember to place an earring back behind them so they don’t fall out. My ‘M’ required a flat round earring back so that’s what I ended up using (not pictured).

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s